Worked layout
Full-Height Board and Batten Template
Compare full-height and half-wall board and batten, choose a count for your wall, and check trim stopping points and usable stock before cutting.
- Wall
- 10 ft wide
- Layout height
- 8 ft
- Battens
- 7
Find a starting point
Ideas for a wall that feels considered
Compare the proportions, see the measurements, and make a layout your own. These worked examples show the geometry before you buy or cut.
Choose a measured layout
13 layouts
Worked layout
Half-Wall Board and Batten Template
Adapt a 42-inch half-wall batten field, compare rail-free and rail-and-batten finishes, and distinguish batten length from the finished top height.
- Wall
- 10 ft wide
- Layout height
- 3 ft 6 in
- Battens
- 7
Worked layout
Framed Panel Wainscoting Template
Explore four framed wainscoting panels, compare opening proportions and rail faces, and adapt the assembly to casing, corners, and actual stock.
- Wall
- 120 in
- Layout height
- 3 ft 6 in
- Clear panel openings
- 4
Worked layout
Board and Batten Wainscoting Template
Plan a lower board-and-batten band with top and bottom rails. Compare finished height, batten lengths, existing baseboard, and rail stock needs.
- Wall
- 120 in
- Layout height
- 3 ft 6 in
- Clear panel openings
- 6
Worked layout
Single-Row Picture Frame Molding Template
Compare three, four, and five picture-frame boxes, check the clear interiors for artwork, and adapt margins and miter cuts to your measured wall.
- Wall
- 120 × 84 in
- Frames
- 4
- Horizontal pieces
- 8
Worked layout
Two-Row Picture Frame Molding Template
Place a two-row molding layout around furniture and controls, compare the single-row option, and read row gaps, frame alignment, and cut labels.
- Wall
- 120 × 84 in
- Frames
- 6
- Horizontal pieces
- 12
Worked layout
Horizontal Shiplap Wall Template
Read horizontal shiplap courses on a 10-by-8-foot wall, inspect the upper remainder, and resolve stock lengths and seams before adapting the plan.
- Wall
- 10 × 8 ft
- Orientation
- horizontal
- Courses
- 18
Worked layout
Vertical Shiplap Wall Template
Inspect vertical shiplap edge strips, full-height stock fit, and window notches. Compare the same wall horizontally before choosing the layout.
- Wall
- 10 × 8 ft
- Orientation
- vertical
- Columns
- 22
Worked layout
4×3 Grid Accent Wall Template
Compare a rectangular 4×3 grid with a true square-cell layout, inspect required margins, and choose which members run through each intersection.
- Wall
- 10 × 8 ft
- Grid
- 4 columns × 3 rows
- Clear cell width
- 2 ft 2 1/4 in
Worked layout
Board and Batten Around a Window Template
Adapt a window-wall layout with continuous battens. Compare nearby counts, inspect casing gaps, and keep the return wall’s independent layout intact.
- Walls
- 2
- Window
- 36 × 42 in
- Installed pieces
- 14
Worked layout
Three-Piece Door Casing Template
Adapt a 36-by-80-inch door casing example. Follow the head and leg miters, avoid adding reveal twice, and compare square joints and matching second faces.
- Opening
- 36 × 80 in
- Visible face
- 2.5 in
- Pieces
- 3
Worked layout
Picture-Frame Window Casing Template
Adapt a closed 36-by-48-inch window casing frame. Read the miter points, test another face width, and compare a separate stool-and-apron assembly.
- Opening
- 36 × 48 in
- Visible face
- 2.5 in
- Pieces
- 4
Worked layout
Vertical Wood Slat Wall Template
Explore a 48-slat wall with equal end gaps, then compare nearby counts and edge treatments using your actual slat face, wall measurements and stock.
- Wall
- 10 × 8 ft
- Slat face
- 1.5 in
- Slats
- 48
Need the measuring method first?
Read the guide before adapting a template.
Guides separate design conventions, field inputs, formulas, and product boundaries.