Measured planning library
Find the next measurement, choose the proportions, or prepare a material list. Each guide includes a worked layout you can adapt to your project.
Measure
Choose these guides when the next blocker is a wall boundary, opening rectangle, installed face, layout height, or another field input that must be named before calculation.
Planning guide
Measure wainscoting top, bottom and opening positions from one wall datum. Record actual rail and stile faces, then verify the layout before cutting.
Planning guide
Measure the available wall rectangle, molding face, margins, and frame gaps. Identify outside dimensions and miter long points before making cuts.
Planning guide
Measure baseboard at its installation height between actual stops. Record doorway casing, corners, returns, and irregular-room runs without double deductions.
Planning guide
Measure shiplap’s installed repeat, separate it from loose board width, and check final strips, profile engagement, and stock before calculating coverage.
Planning guide
Measure wall paneling, openings, trim faces, shiplap coverage, and material inputs by treatment. Keep measured facts separate from design choices.
Planning guide
Measure door and window casing without adding reveal twice. Learn which edges to record, how to read miter points, and when to use a stool-and-apron assembly.
Compare
Use these guides to separate design choices from formulas, then compare counts, gaps, rows, heights, orientations, and edge treatments without changing unrelated inputs.
Planning guide
Choose wainscoting height by comparing taped top lines with furniture, window sills, and trim. Check rail faces, cap height, and adjoining walls.
Planning guide
Choose picture-frame molding counts, side margins, clear gaps, and rows. Compare furniture alignment and frame proportions before measuring cuts.
Planning guide
Choose wood slat gaps by comparing counts, end margins and actual face width. Check loose slats versus fixed panels, openings and stock before committing.
Calculate
Work out coverage and piece quantities, then check the product and stock dimensions needed for purchasing.
Planning guide
Estimate baseboard from individual runs, joint details, and usable stock. Separate installed footage, miter blanks, cutting losses, and spare boards.
Planning guide
Estimate shiplap using installed coverage, window cuts, blank lengths, and usable stock. Follow a worked purchasing example with kerf, end trim, and reserve.
Planning guide
Calculate grid cell width and height, compare square and rectangular layouts, and choose margins and through members before making the cut list.
Mark
Use these workflows when the geometry already has a physical zero and the remaining task is to transfer absolute marks or preserve alignment through an opening.
Planning guide
Plan board and batten beside doors and windows: measure the casing, compare continuous and separate layouts, and check narrow gaps before cutting.
Prefer a starting configuration?
Compare diagrams and dimensions, then use your own wall measurements.